Paddle And PVC Mixers Advantages And Applications

Paddle mixer is a mechanical device, which is used to mix the liquid ingredients. This mixer is somewhat similar to the type of plow but paddles mounted on the shaft are different in design from the plow mixer. 

Paddles can be oriented so that the impact of lateral / back and axial mixing and generally operated at a high speed from the plow mixer. Apart from this Denmark provide us exotic ranges of wood polymer composite mixers at low cost.

Image result for PVC Mixers

Higher speeds can cause segregation to produce the heavier products was thrown near the wall and the lighter products near the center.

Paddle Mixer Advantages:

Mixers paddle is the ideal tool for the rapid mixing of materials such as gypsum plaster, jointing compounds, paints, and fibrous materials.

Many manufacturers have come up with a mixer paddle mixer can pretty heavy duty concrete mix and come up with a Hex shaft for attaching to drill heavy duty or thread that allows them to be attached to the mixing power tools massively increase their effectiveness.

Here is a list of the advantages of a paddle mixer:

  • Rapid mixing ingredients
  • Mixing Paddles durable
  • Steel components
  • Powder Coated Finish
  • Attachable Power Mixing Equipment

Paddle Mixer Application:

Squeezing motion of the paddle mixer makes this type of industrial mixer is best suited for heavy-duty materials and applications. PVC mixer material applications include:

Mixing: FGD scrubber sludge, fly ash and lime to SO2 neutralization, city sludge composting facilities, and other processes combining moist and dry feed ingredients.

Cooling: Fly ash, cement or lime kiln dust, dust casting, iron-oxide, friction material waste, lead fumes, dust iron ore, and zinc oxide.

Agglomeration: Granulation of various materials – fine coke, chemical consumer products, carbon powder, cement kiln dust, flue dust from the dust collector, pigments, and dyes.

PVC Mixers: PVC Mixers have at least three blades Mixing run at high speed to get the right material for the entire batch temperature to properly absorb and integrate all the ingredients.